Escort 3016B User Manual
Page 24
3
Initialisation
Page 3.4
3.2.3. Power up of ESCORT 3016B and ESCORT 3004B
Power-up of the recorders ESCORT 3016B and ESCORT 3004B is proceeded from the right side of
the appliances with the On/Off switch to the side marked "I".
A LED marked "ON" on the front side on the keyboard will confirm the power-up of the appliance.
After initialisation of the internal software, the recorder will display an introducing window with:
-the version of the software:
Version x.y
-the number of channels:
6 ,12, 18 or more
then enters automatically the DISPLAY mode (oscilloscope).
3.3. CONFIGURATION ON POWER-UP
On power-up, the appliances run under the latest configuration at switching-off (either normal or
after power shut-down).
If no configuration is run at power-up, contact the after-sales service
In case of wrong initial configuration, you can start the appliance with the default configuration :
you must press the key
until display of the initialising page.
ON/OFF
switch
Power-up LED
F1