Escort 3016B User Manual
Page 115
15
Ethernet interface
Page 17
14.5.9.Memory mode
14.5.10.
Reloadings, real-time savings
HEADER
PARAMETERS
EXAMPLES
REARm
P1
REARm SINGLE
Defines the rearming
P1 = SINgle,AUTo,SETup
REARm:SETup
P1
REARM SETUP;REAR:SETUP 2
Number of setup to load
Load setup 2
P1 = 1 ? 15
REARm ?
Returns the kind of rearming
SAVE
P1
SAVE DISK
Real time saving in file
P1 = NO, DISk or MEMOry
NO : no file
DISK : save on HDD or USBKey
MEMOry ( only in DIRECT mode)
SAVE ?
Returns the kind of real time file save
SAVE:MEM
P1,P2
Defines the triggering of memory record in DIRECT mode
P1= DIRect,TRIG or MANual
P2=CONt,NOCont : rearming
SAVE:MEM ?
Returns the kind of memory triggering in DIRECT mode
SAVE MEM;SAVE:MEM
TRIG,NOC;:TRIG:CHAN A2,S1,POS
HEADER
PARAMETERS
EXAMPLES
MEMSpeed
P1,P2
MEMSPEED 10,MICRO
Defines the sampling period
Period of 10 sec
P1 = Period ( from 1 to 500)
P2 = MICro,MIli,Sec,Min or HOur unit
MEMSpeed:EXT
External clock using
MEMSpeed ?
Returns the sampling period
MEMBloc
P1
MEMBLOC 4
Defines the number of blocks
4 blocks
P1 = 1,2,4,8,16..128
MEMBloc ?
Returns the number of blocks and the validity of them
:MEMBLOC 4,2 : we have 4 blocks with
2 valid blocks
POSTrig
P1,P2
:STOP:AUTO;POSTRIG 0
Defines the triggering position within the record
Record after triggering
P1 = from -100 to +100 in %
P2 = disable trigger while pretrigger OFF,ON
POSTrig ?
Returns the triggering position
MEM:CONT
P1,P2
Defines the action after recording
P1 = PLot ,NOPlot : plot or not
P2= FIle ,NOFile : file save or not
MEM:CONT ?
Returns the action after recording
FILE:NAMe
P1,P2
Name of the file to save
P1=BINary,TEXTe : file format
P2 : name of file (max 12 caracteres)
FILE:NAMe ?
FILE:LENGth
P1,P2
Defines the file size limit
P1=from 1 to 1000
P2=KSample or MSample
FILE:LENGth ?
Returns the file size limit
:FILE:NAME BIN,"FileO";LENG
LIM;LENG:LIMIT 10,MS