Step three: configure the stapler/stacker settings – HP LaserJet Enterprise M806x+ Black and White Laser Printer User Manual
Page 85
Step three: Configure the Stapler/Stacker settings
1.
Click the
General
tab.
2.
In the left navigation pane, click the
Control Panel Administration Menu
link.
3.
In the
Control Panel Administration Menu
area, expand the
Administration
list.
4.
Click the
Stapler/Stacker Settings
link. Select the item settings to configure:
●
Operation Mode
drop-down menu:
Mailbox
or
Stacker
mode
●
Stapling
drop-down menu: select the position and number of staples. The following staple
options are available:
◦
None
◦
Top left
◦
Top right
◦
Two left
◦
Two right
◦
Two top
◦
Two top or left
●
Staples are very low
drop-down menu: select to
Continue
or
Stop
from the drop-down menu
●
Job Offset
drop-down menu: select
On
or
Off
from the drop-down menu
●
Low-humidity Printing
drop-down menu: select
Enabled
or
Disabled
ENWW
Configure the product for Mailbox Mode or Stacker Mode
77