Promise Technology 2-Year Extended Warranty for VessR2000 RAID Head - Manual (Page 206)

179
Product Manual WebPAM PROe - System Configuration
• Model - Model of PROMISE system
• Physical Drive ID – ID number
of the physical drive
• Location – Enclosure number
and slot number
• Alias – If assigned
• Physical Capacity – Total capacity in GB
• Configurable Capacity –
Usable capacity in GB
• Used Capacity – Capacity
actually used in GB
• Block Size – Typically 512 Bytes
• Operational Status – OK is
normal, Stale, PFA, Dead
• Configuration – Array number and
sequence number, spare number,
Model – Make and model of the drive
• Drive Interface – SATA 1.5Gb/s or
3Gb/s, SAS 3Gb/s or 6Gb/s
• Serial Number – Serial number of the drive
• Firmware Version – Firmware
version on the drive
• Protocol Version – ATA/ATAPI
or SCSI protocol version
• Visible To – Controllers that can
access this physical drive
• Write Cache – Enabled or disabled
• Read Look Ahead Cache –
Enabled or disabled
• Read Cache Support – Yes or No
• SMART Feature Set – Yes or No
• SMART Self Test – Yes or No
• SMART Error Logging – Yes or No
• Command Queuing Support
– TCQ or NCQ
• Command Queuing – Enabled or disabled
• Queue Depth - Number of commands
• Maximum Multiple DMA Mode Supported
• Maximum Ultra DMA Mode Supported
• DMA Mode
• Power Saving Level –
Enabled or disabled
• APM Support – Standby or Active
• Medium Error Threshold
• Drive Temperature
• Drive Reference Temperature
3. Click the physical drive you want, then click the View button.
Physical drive information includes:
Advanced information for SATA physical drives includes: