Panasonic Lumix DC-FZ1000 II Digital Camera - Manual (Page 45)

DVQX1774 (ENG)
45
Recording
Adjusting the focus after recording
([Post Focus] / [Focus Stacking])
Recording mode:
You can record 4K burst pictures while changing the focus point and then select a focus
point after recording. This function is best for non-moving subjects.
• To record pictures, use a UHS Speed Class 3 card.
• We recommend using a tripod to perform [Focus Stacking].
• During recording, the angle of view will be narrower.
1
Set the drive mode dial to [ ]
2 Determine the composition and press the
shutter button halfway
• Auto Focus activates and automatically detects the
focus point on the screen. (While the shutter button
pressed halfway, shake may be seen on the screen.)
• If there is no focus point on the screen, the Focus
indicator ( ) blinks and you cannot record.
From halfway pressing the shutter button to completion of recording
• Do not change the distance to subject or the composition.
3
Press the shutter button fully to start
recording
• The focus point changes automatically while recording.
When the recording progress bar ( ) disappears,
recording automatically ends.
• The data will be saved as a single file in the MP4
format.
• If [Auto Review] is set, a screen will automatically
appear that lets you select the focus point. (→45)
●
If the surrounding temperature is high or [Post Focus] recording is performed continuously, [ ]
may be displayed and recording may be stopped halfway through. Wait until the camera cools down.
Select the focus point and save the picture ([Post Focus])
1 On the playback screen, select the image with the
[
] icon and press