Operation, Using the t 758 – setup menu – NAD Electronics T 758 V3i 7.1-Channel Network A/V Receiver User Manual
Page 28
ENGLISH
28
3
At “A/V Presets” page, set “Preset: 1” to the following conditions - use
[
D/F
] to select “Yes” and press [ENTER] to confirm selection and move
on to the next setting.
While at “Save Current Setup to Preset” menu line, use [
S
] to save the
above settings to Preset 1. Below OSD will be shown, affirming that the
above settings are now saved to “Preset 1”.
When you recall “Preset 1” using the remote control (for AVR 4, “A/V
PSET” + “1”), the above preset values allocated at “Preset 1” (preset
settings as shown in the OSD captures at Step 1) will be recalled and
effected at the current source.
4
Now, repeat again Step 1 above but this time with the following
settings
Listening Mode Setup: Listening Modes/Dolby Digital/Stereo/None
DSP Options: 5ms
Tone Controls: Tone Defeat/On
Front Panel Display Setup: Set “Line 2” to “Audio Source Format”
5
With the above settings, scroll to “A/V Presets” from the SETUP MENU
page. Use [
S
] to access “A/V Presets” menu.
OPERATION
USING THE T 758 – SETUP MENU