Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 173)

Granit XP User Guide 157
Replacements on page 284), and scan the value and the Save barcode from the
Programming Chart, beginning on page 289. The data characters should then
appear properly.
GS1-128
<Default All GS1-128 Settings>
GS1-128 On/Off
GS1-128 Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 140) for additional information. Minimum and Maximum
lengths = 1-80. Minimum Default = 1, Maximum Default = 80.
Code 128 Code Page
* On
Off
Minimum Message Length
Maximum Message Length