Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 188)

172 Granit XP User Guide
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is
not found within this time period, the data can be either transmitted or discarded,
based on the setting you are using for
EAN/JAN-13 Addenda Required . Set the
length (in milliseconds) for this timeout by scanning the barcode below, then set-
ting the timeout (from 0-120 milliseconds) by scanning digits from the
Programming Chart, beginning on page 289 of this manual, then Save . Default =
500.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
EAN/JAN-13 Addenda Separator
When this feature is On, there is a space between the data from the barcode and
the data from the addenda. When turned Off, there is no space.
Default = On.
Note: If you want to enable or disable EAN13 with Extended Coupon Code, refer to UPC-A/
EAN-13 with Extended Coupon Code (page 161).
ISBN Translate
When On is scanned, EAN-13 Bookland symbols are translated into their equiva-
lent ISBN number format. Default = Off.
Addenda Timeout
* On
Off
On
* Off