BOSS VE-8 Acoustic Singer - Manual (Page 12)

12
Looper
By operating the [LOOP] pedal you can record your vocal and guitar independently,
and use them for looped performances.
Record
Recording will start immediately
when you press the [LOOP] pedal.
At the point where you want to
loop, press the pedal to switch to
playback.
Loop Playback
Play back the loop.
Pressing the [LOOP] pedal will
switch to overdubbing.
Overdub
Record additional layers while
playing back the loop.
Press the [LOOP] pedal to switch
to playback.
Stop/Clear
To stop, press the [LOOP] pedal twice.
To clear the phrase, hold down the [LOOP]
pedal for at least two seconds while
stopped.
Selecting the Recording Part (Guitar or Vocal)
The part (guitar or vocal) whose [LOOP] button is lit will be
recorded.
You can also use an external footswitch to switch the recorded
part.
& “External Footswitch Setting” (p. 13)
Parameter Value Explanation
C1 , C2 4 LOOPER SOURCE
Loop Playback Level Setting
If you set the playback level at 50 (default value), the volume of
the performance and that of the loop playback will be identical.
If you set the playback level to a value lower than 50, the
volume of the playback will be lower than that of the
performance. As a result, the sound of the performance won’t
get buried by the loop playback sound, even if you record a
multiple number of times.
1 Long-press the [LOOP] button of the part
(guitar or vocal) whose playback level you want to
set.
2 Use the [ ? ] [ = ] buttons to set the playback level.
3 Press the [EXIT] button to exit settings mode.
[LOOP] Pedal Color
Color Status
Red Recording
Blue Playback
Purple Overdub
Blue (blink) Stopped (phrase exists)
Unlit Stopped (no phrase)
Stopping by the External Footswitch
You can stop by pressing the external footswitch just once.
& “External Footswitch Setting” (p. 13)
Parameter Value Explanation
C1 , C2 3 LOOP STOP (HOLD: CLEAR)
Changing the Switching Order of REC 0 PLAY 0 DUB
& “Looper Setting” (p. 13)
MEMO
* The recording time is 80 seconds.
* The recorded content will be lost when you turn off the power.
Press Twice