BOSS VE-8 Acoustic Singer - Manual (Page 2)

2
Setup (Connecting Your Mic and Guitar)
1 Connect included AC adapter, or install batteries (AA x 6)
2 Connect your mic and guitar
Phantom Power Setting
If you’re using a condenser mic that requires phantom power, turn [PHANTOM] switch ON.
3 Connect to the amplifier or PA
Connecting to the Amplifier/Simple
PA (Street or Café Performance)
Outputting Vocal and Guitar Separately
to the PA (Club Performance)
Connecting Your Computer and
Headphones (Home/Studio)
p. 3 p. 4 p. 6
4 Turn the power ON
5 Adjust the mic input sensitivity
You must adjust the mic input sensitivity accurately!
Use the [MIC SENS] knob to adjust the input sensitivity Adjust the sensitivity so that the PEAK indicator lights orange If the
input level is too high, the PEAK indicator lights red
Color Input Level
Green Low
Orange Appropriate (good)
Red Too high (bad)
6 Adjust the output level of the guitar and vocal
* Pin array of the MIC jack
(balanced type)
Always turn the phantom
power off when connecting any
device other than condenser
microphones that require
phantom power
Before you make connections, make
sure that the input gain or volume of
your mixer or amplifier is turned down
By turning on devices in the wrong order,
you risk causing malfunction and/or
damage to speakers and other devices.