Celestron NexStar Evolution 6 150mm f/10 Schmidt-Cassegrain GoTo Telescope - Manual (Page 13)

ENGLISH I 13
NexStar Evolution contains several telescope control features,
such as backlash, and L E D brightness control The Telescope
Setup and Control Menu can be accessed in two different
ways Tap the Settings icon, then tap Scope Setup Or, when
connected to the telescope, simply tap the settings icon
located to the left of the speed rate slider bar
Note: You must tap “Done” in the upper right corner of your
screen for the setting changes to take effect.
SKYPORTAL TELESCOPE SETUP AND CONTROL MENU
UTILITIES
• Battery Status - Displays the battery voltage, whether it’s
discharging or charging, and High, Medium, or Low status
• Tray Lighting - Adjusts the LED brightness of the accessory
tray light Light can be turned off by sliding all the way to 0
• Logo Lighting - Adjusts the LED brightness of the Celestron
power logo and the WiFi logo Can be dimmed down or shut
off for dark sky locations
• Align Using SkyAlign - The default and recommended
alignment for the NexStar Evolution is SkyAlign Alignment
is achieved by centering and aligning 3 bright stars in the
telescope’s eyepiece
• Align Using Manual Align - Identify, select, and center
3 named stars in the telescope’s eyepiece The star is
selected on your screen and centered with the on-screen
direction arrows
• Hibernate Enabled - Allows the telescope alignment to
be saved when shutting the telescope off or disconnecting
and exiting the app
• Max Slew Rate Enabled - Allows the max slew speed to
be adjusted from default
• Max Slew Rate - Increasing speed will draw more battery
power Decreasing speed will operate more quietly
BEHAVIOR
• Sidereal - Compensates for the rotation of the Earth to keep objects centered in the eyepiece of your telescope This is the
default tracking rate and used for all stars and deep space objects
• Lunar - Used for tracking the Moon and when observing the lunar landscape
• Solar - Used for tracking the Sun when solar observing with a proper filter
• Off - Turns tracking off The motors in the telescope will stop unless you are slewing
TRACKING RATE