RIX LEAP L3 3.2-9.6x Thermal Imaging Riflescope - Manual (Page 10)

The status bar, located at the top of the display, provides a visual representation of the scope's current operational
08 ▶
status. The display content from the left to the right is as follows:
1. Zeroing Options
2. Visual Magnification
3. Shutter Mode: Automatic Shutter A/Manual Shutter M
4. Wi-Fi: On/Off
5. Time
6. Battery Level
Status Bar
10
• Remove the lens cap, and press and hold the Power button to power on the device. Then, the home screen is displayed after
several seconds;
• Rotate the eyepiece diopter adjustment ring until the display icon can be seen clearly;
• Adjust the focus ring of the objective lens to achieve a clear focus on the observed object ；
• For the image mode, display brightness, image contrast, and other functions, please refer to the shortcut menu functions in
this manual;
• After use, press and hold the Power button to display the shutdown progress bar. When the progress bar is at the shutdown
position, release the button to turn off the thermal imager.
Power-on and Settings
09