RIX LEAP L3 3.2-9.6x Thermal Imaging Riflescope - Manual (Page 17)

● Pixel Defect Correction
When using the scope, you may see pixel defects, such as visible light spots or dark spots with stable brightness. To address
this problem, the Pixel Defect Correction function can be used to remove the pixel defects.
• In the Setting Menu, rotate the left knob to select Pixel Defect Correction, and press the left button to enter the interface for
pixel defect correction;
• In this interface, rotate the upper knob/right knob to move the cursor in the X/Y direction so that it coincides with the defec-
tive pixel point. Press the left button to add the defective pixel selection, and press the left button again at the same position
to delete the defective pixel selection;
• After the defective pixel is added, press the up button to choose whether to perform Pixel Defect Correction;
◀ 15
● Auto Display-Off
• In the Setting Menu, rotate the left knob to select Auto Display-Off;
• Turn the upper knob to switch between OFF/5min/10min/15min;
● Auto Power Off
• In the Setting Menu, rotate the left knob to select Auto Power Off;
• Rotate the upper knob to switch between OFF (default)/20min/40min/60min;
● Unit Switching
• In the Setting Menu, rotate the left knob to select Unit Switching
• Rotate the upper knob to switch between meters/yards;