RIX LEAP L3 3.2-9.6x Thermal Imaging Riflescope - Manual (Page 15)

On the home screen, rotate the left knob to open the Function Menu. In the Function Menu, rotate the left knob to select
Settings, and then press the left button to open the Setting Menu.
● Zeroing
• In the Setting Menu, rotate the left knob to select Zeroing, and press the left button to enter the interface for zeroing settings;
• Rotate the left knob to switch between the A/B/C/D/E zeroing profile, or press the plus sign to add a new one; after selecting
the zeroing profile, press the left button to enter the zeroing interface;
• On the zeroing interface, use the left knob to navigate through the options, including zeroing distance setting, screen freeze,
reticle movement, save zeroing and exit, delete current distance , and zeroing deletion. Simply rotate the left knob to
select the desired option;
• When selecting Zeroing Distance, rotate the upper knob to choose the setting options for hundreds, tens, and ones. To
◀ 13
adjust each digit, rotate the right knob and cycle through the numbers 0-9 accordingly;
13
Setting Menu
● Stadiametric Rangefinding
The LEAP series includes the stadiametric rangefinding function, which calculates the approximate distance from a target
with a known size.
• In the function menu, rotate the left knob to select Stadiametric Rangefinding;
• Rotate the upper knob to select the size of the target, and rotate the right knob to move the upper and lower horizontal lines
of the display area to coincide with the upper and lower edges of the target;
• The distance measurement value is displayed below the horizontal line in real time.