RIX LEAP L3 3.2-9.6x Thermal Imaging Riflescope - Manual (Page 7)

Picatinny rail
Mount
Device Preparation
05
◀ 05
● Open the packaging box and take out the scope;
● Check and confirm that the accessories in the package are complete;
● Check the scope body, lens surface, eyepiece, buttons, and knobs to confirm that there is no damage;
● Make sure the surface of the optical lens is clean before use;
Device Installation
06
There are two Picatinny mounting brackets
in the accessories in the package. Please
follow the schematic diagram below for
installation.
Device Power Supply
07
The LEAP series is powered by a replaceable 18650 battery. A single battery can provide up to 8 hours of continuous opera-
tion.