RIX LEAP L3 3.2-9.6x Thermal Imaging Riflescope - Manual (Page 8)

Safety Precautions
• Please remove the battery if the device is not in use for a long time;
• Do not power the device with a modified or damaged battery;
• Do not expose the device to high temperatures or open flame;
• Please Note: The decrease in battery pack capacity under sub-zero temperatures is a normal occurrence and not a factory
defect；
• Do not use the battery at a temperature above 50°C, as it may reduce the service life of the battery.
06 ▶
● Push the switch to open the battery compartment cover;
● Put the 18650 battery into the battery compartment. Pay attention to the direction
of the positive and negative poles, with the positive pole inward, and the negative pole
outward;
● After putting the battery in, press the battery compartment cover firmly, and the
switch will automatically pop up and lock.