Important safety instructions – Epson Progression U12 User Manual

Page 5

Advertising
background image

1.

Read all of these instructions and save them for later reference.

2.

Follow all warnings and instructions marked on the computer.

3.

Unplug the computer from the wall outlet before cleaning. Use a

damp cloth for cleaning; do not use liquid or aerosol cleaners.

4.

Do not spill liquid of any kind on the computer.

5.

Do not place the computer on an unstable cart, stand, or table.

6.

Slots and openings in the cabinet and the back or bottom are

provided for ventilation; do not block or cover these openings.

Do not place the computer near or over a radiator or heat

register.

7.

Operate the computer using the type of power source indicated

on its label. If you are not sure of the type of power available,

consult your dealer or local power company.

8.

If you plan to operate the computer in Germany, observe the

following safety precaution:

To provide adequate short-circuit protection and overcurrent

protection for this computer, the building installation must be

protected by a 16 Amp circuit breaker.

9.

Connect all equipment to properly grounded (earthed) power

outlets. If you are unable to insert the plug into an outlet,

contact your electrician to replace your outlet. Avoid using

outlets on the same circuit as photocopiers or air control

systems that regularly switch on and off.

Important Safety Instructions

10.

Do not allow the computer’s cord to become damaged or frayed.

iii

Advertising
This manual is related to the following products: