Epson Progression U12 - Manual (Page 144)

selecting an Option
When you use this program, you often need to select an option
from a menu. There are two ways to do this:
Use the arrow keys ) to
highlight the option and press
Type the number of the option and press
You can select almost any option that appears on the screen
using either method.
selecting a Drive
If you have more than one hard disk drive, you see this prompt:
Enter drive number ? (1/2)
Select 1 for the first hard disk or 2 for the second hard disk.
Then see the instructions below for the Hard Disk Format
Menu option you want to use.
Option 1, Format
If you select Format from the Hard Disk Format Menu, you
see the following (for a disk with no defective track table):
Format
Hard
Disk < Drive >
Scan hard disk to get defective track
information? (Y/N)
(If the disk already has a defective track table, you do not see
this because you do not need to scan for bad tracks.)
6-4 Formatting a Hard Disk