Epson Progression U12 - Manual (Page 85)

Removing SIMMs
If you need to remove SIMMs from your computer, have your
dealer do it for you or follow the steps below.
1. If you are removing two SIMMs, remove the one in the right
socket (labeled U11) first. Use your fingers or two small
screwdrivers to pull away the tabs that secure the SIMM at
each end. Be careful not to pull the tabs too far, or they may
break.
tabs
As you pull away the tabs, the SIMM falls to the right at an
angle. Release the tabs and lift the SIMM out of the socket.
2. If you are removing a second SIMM, repeat the procedure
described above.
3. After you replace the computer’s cover, be sure to run the
SETUP program so your computer can update its
configuration. See Chapter 2 of the Setup Guide for
instructions.
3-26 Installing and Removing Options