Epson 8100i - Manual (Page 38)

32 Setting Up the Projector
4. To use the EMP Link V software or program new effects for the
Effects buttons on the remote control, connect one end of the
Mac serial cable to the
MAC SERIAL terminal on the main cable.
5. Connect the other end of the serial cable to the printer/
modem port on the back of your PowerBook.
Connecting the Audio Cable
1. If you’ll be using audio, connect one end of the 3.5-mm audio
cable to the Audio port on the projector.
2. Connect the other end of the audio cable to the audio-out port on
your PowerBook.
Audio port
audio cable