Controlling the projector, Selecting your video source, Adjusting sound volume – Epson 8100i User Manual
Page 57: Selecting your video source adjusting sound volume
Using the Projector
51
Controlling the Projector
While giving your presentation, you may want to switch between
video sources, adjust the volume, pause the action or sound, or display
a picture within your current video display. Make sure you have set up
your projector and connected your audio or video source as described
in Chapter 1.
Selecting Your Video Source
If the projector is connected to more than one computer and/or video
source, you can use the buttons on the remote control or the control
panel to switch between the different sources.
On the control panel, press the
Computer
button to switch between
the computer sources and press the
Video
button to switch between
standard (composite) video, S-Video, and component video (BNC).
On the remote control:
■
Press the
Video
button to switch between a standard composite
video source and an S-Video source.
■
Press the
Comp1
button to select the Computer 1 source.
■
Press the
Comp2/YCbCr
to select the Computer 2 or
component video source.
After you select a source, the screen goes dark for a moment
before the image appears.
Adjusting Sound Volume
Using the remote control or the control panel, you can adjust the
volume of your video or computer sounds.
■
To increase the volume, press on the right (
+
) side of the
Volume
button.
■
To reduce the volume, press on the left (
–
) side of the
Volume
button.
E@sy-MP
Select video
source
Select
computer 1
Select
computer 2
or component
video
Adjust volume