Epson 8100i - Manual (Page 47)

Using the Projector 41
5. Do one of the following:
■ If you’ve connected more than one computer and/or video
source, you may need to press the
Computer or Video
button on top of the projector to select the correct source.
(Allow a few seconds for the projector to sync up after
pressing the button.)
These buttons switch the display between the video source(s)
and the computer source(s).
■ Turn on or restart your computer. In a few moments, you
should see your computer display projected.
(Windows only: If you see a New Hardware Found message
saying that it has found a plug-and-play monitor, click
Cancel .)
■ If you’re projecting a video, turn on your video source and
press the
Play button.
If a projected image fails to appear, see the next section for help.
Once you see your image, turn to page 44 for instructions on focusing
and making other image adjustments.
When you’re done with your presentation, shut down the projector as
described on page 58. Shutting down the projector correctly prevents
premature lamp failure and possible damage to the projector from
overheating.
Power
Video Computer
A/V mute
Resize
Esc Help Menu
Shift
Keystone
Volume
Sync.
Sync.
T ra
c k in
g
T
ra
c k in
g
Video button
Computer
button