HP 2250 - Manual (Page 24)

3-4
7. Select Client Setup if the printer is connected to a server or
someone's machine. Select Server or Peer-to-Peer Setup if you are
setting up a print server for the first time, or if you will print directly
to HP JetDirect EIO print server installed in your printer. If you are
not sure how to connect your network printer, ask your network
administrator, or see the next section, Network Printing for more
information.
Setting Up Your Printer on a Macintosh Computer
Connect your printer to a Macintosh computer via an HP JetDirect print
server.
Before connecting your printer to the JetDirect server, make sure your
printer is an:
• HP Business Inkjet 2250 printer with an HP JetDirect card, or
• HP Business Inkjet 2200 printer with the HP Postscript/PCL5 Kit
upgrade and an HP JetDirect card.
These cards can be purchased as accessories (see HP Supplies
and Accessories for more information).
1. Connect the Ethernet cable to the printer and the JetDirect server.
2. Print the configuration page to determine the AppleTalk printer
name. For instructions of printing a configuration page, see
page 7-1.
3. Insert the Starter CD into the CD-ROM drive. Double-click the
Installer icon located in the INSTALLER\<language> folder of the
Starter CD, where <language> is your language preference.
For example, the INSTALLER\ENU folder contains the Installer icon
for the English driver. For a list of languages and their
abbreviations, see the page 4-5.
4. Follow the instructions on the screen to complete the installation.
5. Double-click the Desktop Printer Utility icon in the
APPLE EXTRAS\APPLE LASERWRITER SOFTWARE folder of the hard
drive.
6. Select LaserWriter8, followed by Printer (AppleTalk) and click OK.