HP 2250 - Manual (Page 54)

7-10
• Set the port monitor
Use the port software that comes with HP Web JetAdmin, instead
of Microsoft LPR port software. Also, for optimal printing and
spooling of 8.5" x 14" (216 x 356 mm) size jobs, the TCP/IP
Idle time out value of the EIO card should be set to at least 360
seconds. To enable this option:
1. Click Start and select Settings, followed by Printers.
2. Right-click the printer icon and select Modify.
3. Click Next.
4. Set the TCP/IP Idle time out to at least 360.
5. Click Next and then Finish.
• Reduce the complexity of the file
Reduce the complexity of the file by reducing the number of
colors used to create it.
• Print the file from a different application
Some applications handle complex print files more efficiently
than others. Try printing your file from another application.
Customer Support
The information in this section suggests solutions to common problems. If
your printer is not operating properly and these suggestions do not solve
your problem, try using one of the following support services to obtain
assistance.
Note: There are no user-serviceable parts inside the printer.
For more information consult one of the following:
Document Document Contents
This guide This document contains a list of common LCD
messages, their cause, and their remedy. For
more information, see page 6-1.
HP Business Inkjet
2200/2250 Reference
Guide
Included with your printer. It provides setup and
configuration information for your HP color
printer.
Readme Included on the Starter CD. It provides last-minute
important information about your HP color
printer.
HP JetDirect Print Server
Administrator's Guide
Included on the Starter CD. It provides detailed
information on setting up and using your
HP JetDirect EIO Print Server.