HP 2250 - Manual (Page 52)

7-8
3. Press the Resume button to print the demo page.
• Check the printer setup
Make sure your HP Business Inkjet printer is selected as the
current or default printer and that Pause Printing is not checked.
• Check the network setup
Make sure that your printer is properly setup in the network
environment.
A Blank Page is Printed
• Check the printheads for tape
Make sure you have removed the printhead shipping tape that
covers the ink nozzles.
• Check the printer setup
Make sure your printer is selected as the current or default
printer.
• Check the parallel port on your computer
Make sure your printer is connected directly to the parallel port.
Do not share the port with other devices such as a Zip drive.
Placement of the Text or Graphics is Wrong
• The paper size or orientation settings may be incorrect
Make sure the paper size and page orientation selected in the
software program match the settings in the HP print settings
dialog box.
• The paper may not be loaded correctly
If everything on the page is slanted or skewed, make sure the
paper width and length adjusters fit snugly against the left and
bottom edges of the paper stack, and that there are no more
than 250 sheets of paper or a stack of paper 0.98" (25 mm)
thick loaded in either of the paper trays.
• The margin settings may be wrong
If the text or graphics are cut off at the edges of the page, make
sure the margin settings for the document do not exceed the
printable area of your printer.
• Printable area is not set correctly for a LaserJet document
When printing documents formatted for a LaserJet, pages in your
document may get cropped, truncated or the content of one page
may overflow to the next. Set the Emulate LaserJet Margins
option in the printer driver.