HP 2250 - Manual (Page 53)

7-9
Something on the Page is Missing or Incorrect
• The margin settings may be wrong
Make sure the margin settings for the document do not exceed
the printable area of your printer.
• Color print settings may be wrong
Grayscale is probably selected in the HP print settings dialog
box.
• The wrong printer may be selected
Make sure the correct printer is selected as the current or default
printer.
• The Symmetrical Margins option makes the left and right margins
equal and top and bottom margins equal. If the page appears
incorrect, make sure this setting is not selected in the printer
driver.
Printer Takes a Long Time to Print a Job
• Check your system configuration
The minimum system configuration for your printer is
486-66 MHz with 8 MB RAM. However, the printer performance
is optimized for Pentium machines.
• There may be insufficient hard disk space in your system
If you are printing graphics-intensive files, make sure you have
enough (more than 50 MB) hard disk space.
• The port setting configuration in your system is not set to ECP
(Windows 3.1x/95/98 only)
See the manual that comes with your computer for information on
how to change your port setting or contact your computer
manufacturer.
Printing Takes a Long Time Over the Network
• Set the print queue to accept only RAW data
In a Windows NT 4.0 client-server environment, the print server
can be configured to accept only RAW data. In this configuration
the client computer creates the RAW data instead of the print
server. To enable this option:
1. Click Start and select Settings, followed by Printers.
2. Right-click the printer icon and select Properties.
3. Click the General tab.
4. Click Print Processor.
5. Check Always Spool RAW Datatype and click OK.