Heat & Glo Fireplace Heat & Glo Gas Fireplace ESC-42ST - Manual (Page 51)

Heat & Glo • ESC-42ST • 2146-900 Rev. Q • 4/13 51
I. Mystic Ember Placement
WARNING! Risk of Explosion! Follow ember placement
instructions in manual. DO NOT place embers directly over
burner ports. Replace ember material annually. Improperly
placed embers interfere with proper burner operation.
Ember material is shipped with this gas appliance. Use
this material to give the appliance a realistic ash bed. To
place the ember material:
1. Place Mystic Embers in a random pattern around the
base refractory away from port holes as shown in Figure
14.22.
2. Save the remaining ember materials for use during
appliance servicing. The embers provided should be
enough for 3 to 5 applications.
H. Install Teco-Sil (Glass Ember Rock)
1. Install the glass ember rock (Teco-Sil) that is shipped
with this fi replace into the left and right ember light
trays. See Figure 14.19.
Figure 14.19 Glass Ember Bed
Figure 14.20 Ember Bed Painting
2. Using TUP-GBK-12 spray paint, dust the glass ember
rock to create a more natural looking ash bed. Care
should be taken to avoid overspray onto refractory
and stainless steel back plate. See Figure 14.20 and
Figure 14.21.
Figure 14.21 Finished Ember Bed
Figure 14.22 Ember Placement on Base Refractory