Husqvarna 230 ACX - Manual (Page 55)

56 - English
6. MENU FUNCTIONS
To find out the distance from the charging station
to a remote area:
• State a distance that easily exceeds the true
distance. The maximum distance that can be
stated is 1600 ft (500 meters). State the value
100 % for Proportion for the area to which the
distance is to be measured and 0 % for the other
areas. Place Automower™ in the charging
station and select Test OUT (3-2-5). The mower
will now leave the charging station directly
according to the stated direction. The distance
will be shown on the display, stated in meters,
as the mower runs. Stop the mower after the
required distance and read the distance. Enter
the number of metres shown in Distance for the
area in question. Reset the Proportion values
when testing is finished.
Installation shape (3-3)
Automower™ can be set according to three
installation shapes: Open, Normal and Complex.
This setting affects how Automower™ covers a
working area when it mows. Above all it influences
the turning angles and how often the mower changes
direction. The Open setting optimizes the pattern of
movement for an open garden. If the garden contains
a lot of small areas linked with passages a better
function will be obtained with the Complex setting.
Select:
• Open (3-3-1)
for an open lawn area with few obstacles and no
passages.
when steep slopes give an uneven mowing result.
• Normal (3-3-2)
for an average number of obstacles and/or
passages.
• Complex (3-3-3)
for a large lawn area and large number of
obstacles and/or passages.
3-3
3-3-
Open
Normal
Complex
Exit angles
Follow loop
Installation shape
Advanced