Husqvarna 230 ACX - Manual (Page 68)

English - 69
8. MAINTENANCE
8.3 Service
Leave your Automower™ to a dealer for service prior
to winter storage. This is essential in order to keep the
mower in a good condition.
Service usually includes the following:
• Thorough cleaning of body, chassis, blade disc,
skid plate and all other moving parts.
• Testing of the mower’s function and components.
• Checking of wear components such as mower
blades and bearings.
• Testing of the mower’s battery capacity as well as
a recommendation of change if necessary.
• Relubrication of both chassis halves of the mower
in order to maintain moisture and wetness
resistance.
• If necessary the dealer can also load
Automower™ with new software, possibly
including newly added features.
8.4 After winter storage
Check whether Automower™, contact strips and
charging strips need to be cleaned before using. If the
charging or contact strips appear to be burnt, clean
them using fine grade emery cloth. Check that the
mower’s time and date are correct.
8.5 Cleaning
It is important to keep Automower™ clean. A mower
with a large amount of clippings negotiates slopes very
poorly.
Never use a high-pressure washer or even running
water to clean Automower™.
We recommend a brush and spray with water.
Underframe and blade disc
1. Set the main switch to the OFF position.
2. Wear protective gloves.
3. Lift Automower™ onto its side.