Husqvarna 230 ACX - Manual (Page 57)

58 - English
6. MENU FUNCTIONS
Security (4-1)
• PIN code (4-1-1)
Via this function you can change your PIN code
at any time.
• To change the PIN code: Move the cursor to
PIN code and press YES. Place Automower™
in the charging station. Enter the new PIN code
and press YES. Enter the same code again to
confirm, and press YES.
When the PIN code has been changed, the
message PIN code changed is displayed for a
few seconds. The Security menu will then
appear again.
• Time lock (4-1-2)
This function partly involves Automower™
stopping to mow after a predetermined number
of days and not continuing until the correct PIN
code has been entered, and partly that the PIN
code must be entered when the main switch is
set to the ON position. The default setting on
Automower™ is 30 days, but can be changed as
required.
To:
• Activate: Move the cursor to Time lock and press
YES. Now move the cursor to Number of days
and press YES. Specify how many days you
would like Automower™ to mow before it
requests the PIN code. Finish by pressing YES.
When the selected number of days has elapsed,
Automower™ completes mowing and charges
the battery. The message Enter PIN code is then
shown on the display. You then enter your code
and press YES.
In addition, Automower™ will now request the
PIN-code each time the main switch is switched
to ON.
• Deactivate: Move the cursor to Time lock and
press YES. Now move the cursor to OFF and
press YES.
IMPORTANT INFORMATION
Time lock is the most important
theft-prevention function. Accordingly, it is
recommended to have this activated.
4-1
4-1-1
PIN code
Time lock
Stop protection
Settings lock
Security
Sounds
Language
Time and date
4-1-2
_ _ days Number of
days
OFF
PIN code
Time lock
Stop protection
Settings lock