gohastings.com POWERPOD 400 - Manual (Page 6)

Page 6 of 42
Read this manual in its entirety before operating the POWER POD -400 Power Supply/Totalizer. The
POWER POD -400 is designed to operate with most Teledyne Hastings Instruments (THI) flow controllers
and meters. Read all wiring and power hookup instructions and understand the requirements prior to
using another manufacturer’s products with the POWER POD -400. Insure that any product being
interfaced with the POWER POD -400 is wired according to prevailing local safety and operational
standards before operating.
The WARNING label indicates important information that should be heeded for safe and proper
performance of the device.
The label, CAUTION , is used to indicate that damage to the power supply or equipment
connected to it could occur if directions are not followed. Warranty could be invalidated if the
instructions in this manual are not followed.
2.0 Safety
This symbol indicates that a shock hazard may be present. Read the instruction
manual carefully and insure that the device is wired properly and that all settings
have been checked prior to applying power to the device.
When found on the device, this symbol indicates that the operator should refer to
the manual for important instructions on the proper use of this device. When found
in the manual, this symbol indicates that the reader should understand the
implications contained in the text before operating the device.
The following symbols and terms may be found on THI products and/or in THI manuals and indicate
important information.