Horizon Fitness RE7.6 - Manual (Page 13)

BEFORE YOU
BEGIN
ASSEMBL
Y
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP 6
LOWER LINK ARM
PEDAL ARMS
SPACER (H)
BOLT (I)
FLAT WASHER (J)
SPLIT TEFLON
WASHER (M)
FOOTPLATE TUBE
SPLIT TEFLON
WASHER (M)
U BRACKET
A ) Open HARDWARE BAG FOR STEP 6.
B) Align LOWER LINK ARM with U BRACKET.
CAUTION: Be careful to keep the LOWER LINK ARM aligned with guide rail. Do not twist it to the left or right
while positioning it on the U BRACKET.
C) Slide SPACER (H) through U BRACKET and FOOTPLATE TUBE.
D) Insert FLAT WASHER (J) and BOLT (I) into outside end of FOOTPLATE TUBE.
E) Insert 2 SPLIT TEFLON WASHERS (M) on left and right sides of FOOTPLATE TUBE and tighten BOLT (I).
F) Repeat on other side.
BOLT (I)
15 mm
Qty: 2
SPACER (H)
70 mm axis
Qty: 2
FLAT WASHER (J)
35 mm
Qty: 2
SPLIT TEFLON WASHER (M)
24 mm
Qty: 4
HARDWARE BAG FOR STEP 6 CONTENTS :
BOLT (I)
FLAT WASHER (J)
FOOTPLATE TUBE
SPACER (H)
SPLIT TEFLON
WASHER (M)
U BRACKET
TOP VIEW OF LEFT FOOT PAD
INSERT
SPACER
THIS
DIRECTION