Horizon Fitness RE7.6 - Manual (Page 14)

BEFORE
YOU
BEGIN
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
SCREW (L)
15 mm
Qty: 2 SCREW (K)
10 mm
Qty: 2
HARDWARE BAG FOR STEP 7 CONTENTS :
ASSEMBLY STEP 7
LOWER HANDLEBAR
INSIDE
ELBOW COVER
OUTSIDE
ELBOW COVER
SCREW (L)
SCREW (K)
WATER BOTTLE CAGE
LOWER LINK ARM
A) Open HARDWARE BAG FOR STEP 7.
B) Attach the OUTSIDE ELBOW COVER to elbow joint using 1 SCREW (K).
C) Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER.
Note the position of the snap tabs before snapping into position.
D) Repeat on other side.
E) Install WATER BOTTLE CAGE to console mast using 2 SCREWS (L).