Hyundai HI4 - Manual (Page 294)

7. R code
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
7 - 18
7.13 (13) R71 RECORDED SPEED SPECIFICATION METHOD SELECTION
Outline
It selects speed specification method in step recording.
There are 3 types of 0, 1, and 3.
Interpolation On is the case of the linear interpolation or circular interpolation.
Screen display
„ After inputting the recorded speed specification type, if press [SET] key, it will
be displayed on the screen as following screen.
Interpolation OFF Specify Sec
0 Standard
Interpolation ON Specify Speed
Interpolation OFF Specify Sec
1
Specify
Sec Interpolation ON Specify Sec
Interpolation OFF Specify Speed
2
Specify
Speed
Interpolation ON Specify Speed
Rec speed type?(Standard=0,%=1,mm/s=2)
>R71,0
Service System Rel.WAIT Cond Set
14:39:38 *** M A N U A L *** A:0 S:H4
T0
PN:999[*]__ S/F=3/1 Sp:50
>
Service System Rel.WAIT Cond Set