HONDA MM60 - Manual (Page 22)

INSTALLING MOWER
Installing Discharge Chute Cover
1.
.Using 3/8 x 1 in. carriage bolts, insert bolts from
.
under mower deck, passing through holes in
deck and discharge chute.
2. Secure with 3/8 in. flange locknuts.
Discharge Chute
Level Plug
Gearbox
Gear Box
Installing Gear Box Oil and Vent Plug
Gearbox is shipped WITHOUT oil. Plastic gearbox
vent plug comes in burlap bag with other mower
assembly parts.
Before operating mower, check
gearbox and fill if necessary with SAE
gear lube. Operating without oil will severely
damage gearbox.
1. Remove level plug.
2. Add oil until it seeps out level plug hole.
3. Allow several minutes for oil to flow through
bearings and refill as necessary.
4. Install both plugs
2 0