Safety information – HONDA MM60 User Manual

Page 8

Advertising
background image

SAFETY INFORMATION

Stop mower and tractor immediately upon
striking an obstruction. Turn

off

engine, remove

key, inspect and repair any damage before
resuming operation.

transport lock and block mower securely.
Hydraulic system leak down and failure of
mechanical or hydraulic system can cause
equipment to drop.
Disengage power to mower, lower mower to

ground, stop engine, set parking brake

and

remove key before dismounting tractor.

Before working underneath, raise mower, install

Maintenance Safety

Always wear relatively tight and belted clothing
to avoid entanglement in moving parts. Wear
sturdy, rough-soled work shoes and protective
equipment for eyes, hands, hearing and head.
Lower mower to ground or block securely, turn
tractor engine

off ,

remove key and disconnect

mower

driveline from tractor

PTO

before

performing any service or maintenance.
Never perform service or maintenance with

tractor engine running.
Before working underneath, raise mower, install
transport lock and block mower securely.
Hydraulic system leak down and failure of
mechanical or hydraulic system can cause
equipment to drop.

Keep

a l l

persons away from operator control

area while performing adjustments, service

or

maintenance.

sharp, free of nicks and cracks and securely
fastened.
Use a new Nylok blade bolt when you replace
the blade. Do not substitute any bolt for the
special blade bolt. It is self-locking, meeting the
non-loosening requirements for this applica-

tion.
Your dealer

can

supply genuine replacement

blades. Substitute blades may not meet original

equipment specifications and may

be

danger-

Frequently check blades. They should be

ous.
Tighten all bolts, nuts and screws, and check
that all cotter pins are installed securely

to

ensure mower is in a safe condition before
operating.

Ensure all safety decals are installed and in

condition. (See Safety Decals section for

location drawing.)

stalled and in good condition.

Ensure shields and guards are properly in-

Storage

Block mower securely for storage.

6

Advertising