HONDA MM60 - Manual (Page 44)

MAINTENANCE
DEALER LEVEL MAINTENANCE
information in this section is written for dealer
service personnel. The repair described herein
requires special skills and tools. If your shop is not
properly equipped or your mechanics are not
,
properly trained in this type of repair, you may be
time and money ahead to replace complete
assemblies.
Before working underneath, raise mower,'
install transport lock and block mower
securely. Hydraulic system leak down and
failure of mechanical or hydraulic system
can cause equipment to drop.
control area while performing adjustments,
service
or maintenance.
Lower mower to ground or block securely,
turn tractor engine off, remove key and
disconnect mower driveline from tractor
before performing any service or
maintenance.
Keep all persons away from operator
Always wear relatively tight and
belted clothing to avoid entanglement in
moving parts. Wear sturdy, rough-soled work
shoes and protective equipment for eyes,
hands, hearing and head.
A -
Make sure mower driveline
spring-activated locking collar slides freely
and the balls are seated
in mid-PTO shaft
groove.
42