HP 220 - Manual (Page 79)

1 Open the window. 2 Loosen the topscrew of the right front
trim (two full turns).
3 Carefully push the right endcover and
the window apart, far enough to lift the
window upso that the right pivot just
clears its socket.
Do not ever the window up more than is
necessary, so as not to strain or break the
eft pivot.
4 Move the window to the right so that the
left pivot slides out of its socket, and lift
the window clear of the plotter.
Do not et the windowĆpivot springs drop
out of the endcovers.
Torx-15
6Ć15 Removal and Replacement C3187Ć90000
Removing the Window