HP 220 - Manual (Page 94)

8 Disconnect the trailingĆcable connector from the cartridgeĆcarriage PCA.
9 If you need to change the trailing cable:
a Cut the two plastic ties that hold the
cable to the rear tray and bracket.
b Free the cable from the rear tray and
bracket, pulling it up through the slot at
the top of the electronics enclosure
assembly.
Rear tray
Plastic ties
Bracket
Trailing-cable connector
Cartridge-carriage PCA
0D2 DmbtinJ: Replace the ties with
new ones
c Use the old trailing cable as a template
to bend and crease the new trailing cable
to exactly match the creases inthe old
trailing cable.
6Ć30 Removal and Replacement C3187Ć90000