HP EXPANSION BASE 344524-001 - Manual (Page 34)

Removal and Replacement Procedures
Maintenance and Service Guide 5–5
5.4 Base Plate
Spare Part Number Information
1. Turn the Expansion Base upside down with the front facing
away from you.
2. Remove the four PM2.5×17.0 screws 1 that secure the base
plate to the base enclosure.
3. Remove the base plate 2.
Removing the base plate
Reverse the above procedure to install the base plate.
Base plate The base plate is included in the
Miscellaneous Plastics Kit 347436-001