HP EXPANSION BASE 344524-001 - Manual (Page 43)

5–14 Maintenance and Service Guide
Removal and Replacement Procedures
5.8 Front Tray Cover
1. Prepare the Expansion Base for disassembly (Section 5.3) .
2. Remove the base plate (Section 5.4) .
3. Remove the upper chassis (Section 5.5) .
4. Turn the upper chassis upside down with the docking
connector and cable facing away from you.
5. Cut all tie-wraps 1 that bundle the Expansion Base cables
and secure the RJ-11 modem cable to the chassis.
6. Remove the four PM2.0×4.0 screws 2 that secure the front
tray cover to the chassis.
Removing the front tray cover screws
Spare Part Number Information
Front tray cover 347432-001