HP EXPANSION BASE 344524-001 - Manual (Page 35)

5–6 Maintenance and Service Guide
Removal and Replacement Procedures
5.5 Upper Chassis
1. Prepare the Expansion Base for disassembly (Section 5.3) .
2. Remove the base plate (Section 5.4) .
3. Turn the Expansion Base right-side up with the rear panel
facing you.
4. Remove the adhesive-backed 8.0-mm diameter screw
covers 1.
5. Remove the two PM2.0×6.0 screws 2 that secure the rear
cover to the base enclosure.
Removing the rear cover screws