HP EXPANSION BASE 344524-001 - Manual (Page 49)

5–20 Maintenance and Service Guide
Removal and Replacement Procedures
5.12 Front Case
1. Prepare the Expansion Base for disassembly (Section 5.3) .
2. Remove the base plate (Section 5.4) .
3. Remove the upper chassis (Section 5.5) .
4. Remove the front tray cover (Section 5.8) .
5. Remove the speaker assembly (Section 5.11) .
6. Turn the chassis right-side up with the rear facing you. Rotate
the top of the chassis toward you.
7. Remove the six PM2.0×5.0 screws 1 that secure the upper
chassis front case to the chassis.
8. Slide the front case toward you 2 to disengage it from the
chassis.
9. Remove the front case 3 from the chassis.
Removing the front case
Reverse the above procedure to install the front case.
Spare Part Number Information
Front case (plastics kit) 347436-001
Upper chassis 347434-001