Honeywell HCE 60 - Manual (Page 18)

Configuration and electrical connection
16
Switch
position Actuator type Property
Normally
closed Opens the heating circuit if power is
present at its control input.
Normally open Opens the heating circuit if power is
not present at its control input.
Cabling connections
Permissible cable types and lengths
Cable (designation) Connection between sto-
rey contr. HCE 60 and ... Max. permis-
sible length
JE-LiYCY 2 Ч2Ч0.8 Setpoint adjuster HCW 23* 100 m
CY 2 Ч2Ч0.14 Setpoint adjuster HCW 23* 100 m
JE-Y(St)Y 2 Ч2Ч0.8 Setpoint adjuster HCW 23* 100 m
MCR pre-regulator
100 m
Pump relay HREL1 100 m
1.5 mm 2 Thermal actuators
H200 BO and H200 BG 100 m
Prefabricated cable Thermal actuators
H200 BO and H200 BG 1 m
(3 m)
Prefabricated cable Antenna HRA1 1.2 m
* or heating/cooling switchover contact