Honeywell HCE 60 - Manual (Page 45)

Assigning zones and issuing room names
43
The colors of LEDs 1 through 8 now provide information on a fault in
the temperature zones:
Off No fault
Red Cable break / no connection to setpoint adjuster
Green No connection to Hometronic Manager resp. wireless
setpoint adjuster HCU 30
Orange No connection to setpoint adjuster and Hometronic Man-
ager
The storey controller exits the fault display after approx. 60 seconds
and returns to normal mode.
Completing start-up
Closing setpoint adjuster
► Replace cover and snap in both snap locks.
Handing over zoning plan
► Hand over the completed zoning plan and the installation instructions
to the customer. Both documents are important, as changes to the
system may be made in future.