HONDA FL5540K0 - Manual (Page 12)

TRACTOR PREPARATION
HARDWARE BAG CONTENTS
QNT'Y DESCRIPTION
5
2 x 30mm hex hd capscrew
2 12mm x 25mm hex hd capscrew
2 hex hd capscrew
16
12 0 ga. machine bushing
2 hex hd capscrew
2 flat washer
2 hex hd capscrew
2
2
4
6
4
4
4
2
2
2
2
1
hex nut
lockwasher
hex nut
flat washer
lock washer
8 x 1 hex hd capscrews
5/16" lockwasher
flatwasher
hex hd capscrew
flatwasher
# 2 hose clamp
nylon tie
TRACTOR PREPARATION
This loader is not intended to be used with any other attachments mounted on tractor.
REAR COUNTER WEIGHT
DO NOT EXCEED THE RATING FOR MAXIMUM GROSS VEHICLE WEIGHT.
REFER TO OWNER'S MANUAL PROVIDED WITH TRACTOR.
The use of adequate rear countenveight is required for proper loader stability.
Refer to Tractor Owner's Manual for specific recommendations on counterweighting tractor.
Weight added to the rear of the tractor provides better traction and easier, more efficient loader
operation. The tractor must be counterweighted by installation of rear weights.
Additional counterweight requirements will vary with loader attachments and equipment
applications.
specific conditions may not permit safe use of loader at loader rating
or may require more carefully restricted Operation at the rated load.
ROLL-OVER PROTECTION STRUCTURE (ROPS) SYSTEM
The tractor ROPS system must be in place and used properly to ensure adequate operator
protection.
LOADER HYDRAULIC SYSTEM
Follow recommendations in this operator's manual for hydraulic fluid specifications.
TRACTOR TIRES
Selection of tires should be restricted recommendations as specified by your
Tractor owner's manual.
Ag tires are recommended when using the front loader
TIRE INFLATION
Front tires must be maintained at the maximum recommended inflation with the added weight
of loader and material. Ag Tire pressure 34 psi.
Rear tires must be maintained at equal pressure within the recommended tire inflation range.
Ag Tire pressure 24 psi.
10