HONDA FL5540K0 - Manual (Page 19)

SUB-FRAME and COUNTERWEIGHT
COUNTERWEIGHT BRACKET
INSTALLATION
LINCHPIN
MOUNTING PINS
FIXING PINS
Place the rear counterweight bracket on
the rear of the sub-frame aligning the
mounting holes of the bracket with those
of the sub-frame. Insert two
1 x 3.5 inch
mounting pins in the forward holes and
one 1 x 12 inch mounting pin in rear lower
hole. Secure with linchpins.
11. Install the twelve counterweights. Insert
the fixing pins through the
bracket and secure with linchpins.
NOTE: For sub-frame removal use reverse
procedures.
COUNTERWEIGHT BRACKET
17