HONDA FL5540K0 - Manual (Page 40)

LOADER INSTALLATION
LOADER MASTS
4. Move the tractor until the masts
positioned in line with upright pads on the
sub-frame, use two people and the bucket
to lower and guide the masts onto the
pads.
5. Use bucket movement to shake masts to
align pin holes. Insert the fixing pins
through the masts and pads. Install clip
pins through holes.
6. Attach brace arms to mast and front guard
as shown with clevis pins and clips.
NOTE: Route hydraulic hoses along left
brace arm through hose holder
loops.
Ensure high pressure hose (smaller of
two) is positioned on top of larger suction
hose.