HONDA FL5540K0 User Manual
Page 41
Advertising
LOADER INSTALLATION
LOADER STAND REMOVAL
7.
Raise the loader with the loader control
until the stands clear the ground.
8.
Remove fixing pin
remove the stands.
from the stands and
9.
Align the hole in the bottom of the stand
with the mounting
at rear of
mainframe. Slide the stand over the
mounting hook and then insert the fixing
pin previously removed through main
frame and through the stand. Repeat the
above steps for the other side. Lower the
loader
to
the ground.
Front Loader
is ready for operational check.
(Page
25)
Advertising