HONDA FL5540K0 User Manual
Page 32
OPERATING INSTRUCTIONS
TRANSPORTING MATERIAL
Transport material to "unloading point" with
loader bucket as
low as possible to prevent
spillage
and
maintain maximum
stability.
During transport the loader
should be in a position that will not impair
vision,
Observe the following safety messages.
.
any overhead wires or
obstacles when loader
Is
raised, to avoid
damage or possible death by electrocution.
-A loaded bucket should be
transported In a low position at
ground
speeds, especially
if
the
ground is irregular.
Make turns slowly and use the tractor brakes
cautiously. Afull bucket In the raised position
alters the center of gravity of the
and
Increases the possibility of mishaps.
not
or carry personnel
on a loader or attachment; a
or fall could
cause serious Injury.
UNLOADING
As the tractor approaches the "unloading
point", raise the loader to the height required
for clearance
to
"dump" bucket.
Drive slowly to position bucket above
"unloading point", stop tractor and dump
bucket.
NOTE:
Do
not raise loader higher than
required for "dumping" clearance.
As "dumping" clearance height increases, the
bucket position must be adjusted to maintain
a level bucket to prevent excessive spillage
of material from bucket.
30